Products from GA Industri

Products from GA Industri AB

Steel can be found in an amount qualities and executions. Here, you find some of what we produce today. But we are not limited to these.

Feel free to ask us about other qualities. Togheter with our suppliers we can deliver steel with other characteristics.

Click on a headline for more information.

Products from GA Industri

Hot-rolled
Cold-rolled
Hot galvanized

Aluzink
Electric galvanized steel
Hardened steel

Specialsteel
Pre-painted
Ymagine®

Calculate steelweight online here!

Hot-rolled

Structural steel
EN10025	Yield strength Re min. N/mm2	Tensile strength Rm min-max N/mm2		Elongation A ₈₀ % min	Note
EN10025	Yield strength Re min. N/mm2	t<3mm	t>3mm	Elongation A ₈₀ % min	Note
S235JRG2	235	360-510	340-470		Corresponds to Domex 240
S275JR	275	430-580	410-560
Coldshape steel
EN 10149	Yield strength Re min. N/mm2	Tensile strength Rm min- max N/mm2		Elongation A ₈₀ % min
S315 MC	315	390-510		20
S355 MC	355	430-550		19
S420 MC	420	480-620		16
S460 MC	460	520-670		14
S500 MC	500	550-700		12
S550 MC	550	600-760		12
S600 MC	600	650-820		11
S650 MC	650	700-880		10
S700MC	700	750-950		10

Steel for forming
EN10111	Yield strength Re min-max N/mm2		Tensile strength R_m max N/mm2	Elongation min. %
	t 1,5-2,0mm	t 2,0mm<		A₈₀		A₅
	t 1,5-2,0mm	t 2,0mm<		1,5-2,0mm	2,0-3,0mm	3,0 -8,0mm
DD11	170-360	170-340	440	23	24	28
DD12	170-340	170-320	420	25	26	30
DD13	170-330	170-310	400	28	29	33
DD14	170-310	170-290	380	31	32	36

Ymagine®

Ymagine® is a hot-rolled material with excellent thicknesstolerance. Available in thickness 1,0 – 3,0 mm. Quaranteed thicknesstolerance ± 0,05 mm. This makes it suitable for replacing cold-rolled steel. Ymagine® is produced by Corus Ijmuiden in Holland.

Ymagine® D1
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	210-360	335-425	≥23
Typical value	290	385	28

Ymagine® S1
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	235-360	360-510	≥17
Typical value	305	400	27

Ymagine® H320
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	320-430	400-500	≥20
Typical value	370	450	27

Ymagine® H360
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	360-450	430-500	≥20
Typical value	390	465	26
Ymagine® H420
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	420-500	480-620	≥18
Typical value	465	520	24
Ymagine® H500
Mechanical properties	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀ min. %
Guaranteed values	500-600	560-700	≥14
Typical value	550	580	18

Cold-rolled

Steel for forming
EN10130	Yield strength R_e N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀min. %
DC01	-280	270-410	28
DC03	-240	270-370	34
DC04	-210	270-350	38
DC05	-180	270-330	40
DC06	-180	270-350	38
High-strength steel
EN10268: 2006	Yield strength R_e min-max N/mm²	Tensile strength R_m min. N/mm²	Elongation A₈₀ min. %
HC 260 LA	240-310	340	27
HC 300 LA	280-360	370	24
HC 340 LA	320-410	400	22
HC 380 LA	360-460	430	20
HC 420 LA	400-500	460	18

Hot dipped galvanised

Steel for forming
EN 10142	Yield strength Re N/mm2	Tensile strength Rm N/mm2	Elongation A80 min. %
DX51D	140-	270-500	22
DX52D	140-300	270-420	26
DX53D	140-260	270-380	30
DX54D	140-220	270-350	36
DX56D	120-180	270-350	39
.
Structural steel
EN10147	Yield strength R_e min. N/mm²	Tensile strength R_m min. N/mm²	Elongation A₈₀ min. %
S220GD	220	300	20
S250GD	250	330	19
S280GD	280	360	18
S320GD	320	390	17
S350GD	350	420	16
S550GD	550	560	.
High-strength steel
EN10292: 2006	Yield strength R_eN/mm²	Tensile strength R_mmin. N/mm²	Elongation A₈₀ min. %
HX260LAD	260-330	350-430	27
HX300LAD	300-380	400-480	23
HX340LAD	340-420	410-510	21
HX380LAD	380-480	440-560	19
HX420LAD	420-520	470-590	17
HX460LAD	460-540	500-640	16

Zinklayer
Weightclass	Zinkweight g/m2, sum of both sides. Threepointtest min Onepointtest
Z100	100	85
Z140	140	120
Z200	200	170
Z275	275	235
Z350	350	300
Surface
Appearance
N	Normal rosepattern
M	Reduced rosepattern
Quality
A	Normal surface. Errors in surface can occur
B	Improved surface. Small errors are allowed.
C	Best surface. One errorfree side.
Treatment
C	Chemical passivation
O	Oil
CO	Chemical passivation and oil

Aluzink

Steel for forming
EN10215	Yield strength R_e max. N/mm²	Tensile strength R_e max. N/mm²	Elongation A₈₀ min. %
DX51D+AZ		500	22
DX52D+AZ	300	420	26
DX53D+AZ	260	380	30
DX54D+AZ	220	220	36
Structural steel
EN10215	Yield strength R_e min. N/mm²	Tensile strength R_e min. N/mm²	Elongation A₈₀min. %
S250GD+AZ	250	330	19
S280GD+AZ	280	360	18
S320GD+AZ	320	390	17
S350GD+AZ	350	420	16
S550GD+AZ	550	560	.

Aluzinklayer
Weightclass	Aluzinkweight g/m2, sum of both sides.	Threepointtest min onepointtest
AZ100	100	85
AZ150	150	130
AZ165	165	150
AZ185	185	160
AZ200	200	170
Surface
Apperance
M	Normal rosepattern
Quality
A	Normal surface. Errors on surface can occur.
B	Improved surface. Small errors are allowed.
Tretment
C	Chemical passivation
O	Oil
CO	Chemical passivation and oil
S	Antifinger print (ALC-surface)

Electric galvanized steel

Steel for forming
EN10152	Yield strengthR_e max.N/mm²	Tensile strength R_m N/mm²	Elongation A₈₀min. %
DC01+ZE	280	270-410	28
DC03+ZE	240	270-370	34
DC04+ZE	220	270-350	37
DC05+ZE	190	270-330	39
DC06+ZE	190	270-350	37
Galvlayer
Designation		µm / side
ZE 25/25		2,5/2,5
ZE 50/50		5,0/5,0
ZE 75/75		7,5/7,5
ZE 100/100		10,0/10,0
ZE 125/125		12,5/12,5

Hardened steel

Brushsteel
Cold-rolled steel
Steelquality	Condition	¹⁾Yield strength R_p0,2 N/mm²	¹⁾Tensile strength Rm N/mm²	¹⁾Elongation A₈₀ %	¹⁾Hardness HRC
²⁾Docol 20MnB5	Heat to red	350	500	28	.
	Hardened in water		1480		46
	Hardened in oil		1360		36
Docol 30MnB5	Heat to red	350	500	28	.
	Hardened in water		1845		53
	Hardened in oil		1675		50
Docol 38MnB5	Heat to red	350	500	28	.
	Hardened in water		2050		56
	Hardened in oil		1845		53
Docol 27MnCrB5	Heat to red	400	550	25	.
	Hardened in water		1735		51
	Hardened in oil		1575		48
Docol 33MnCrB5	Heat to red	400	550	25	.
	Hardened in water		1845		53
	Hardened in oil		1675		50
Docol 39MnCrB5	Heat to red	400	550	25	.
	Hardened in water		1980		55
	Hardened in oil		1795		52
¹⁾ Typical values ²⁾ "Boloc-02"
Hot-rolled
Steelquality	Condition	¹⁾Yield strength R_p0,2 N/mm²	¹⁾Tensile strength Rm N/mm²	¹⁾Elongation A₈₀ %	¹⁾Hardness HRC
Domex 014 BOR	Heat to red	330	520	30	.
	Hardened in water	1200	1600		48
	Hardened in oil	950	1330		43
Domex 024 BOR	Heat to red	350	530	28	.
	Hardened in water	1200	1600		48
	Hardened in oil	990	1450		45
Domex 034 BOR	Heat to red	370	600	25	.
	Hardened in water	1200	1720		52
	Hardened in oil	1030	1570		48
Domex 044 BOR	Heat to red	380	620	24	.
	Hardened in water	1200	1720		52
	Hardened in oil	1200	1610		49
¹⁾ Typical values

Special steel

Some examples of special steel that GA can deliver.

Quality

1265-11

1265-16

1770-02

1770-04

Ask us about other qualities. We have many contacts that can
help us with all possible materials.

Pre-painted

Corus designation	Lacquer	Thickness	Corresponding designations
Corus designation	Lacquer	Thickness	SSAB Prelaq	RUUKKI	Plannja	Arcelor Granite/Estetic
KID Interior lack	Polyester	15 µm
Polyester	Polyester	25 µm
PVDF	Polyester	25 µm
Polyester 35	Polyester	35 µm
1)Armatec®	Polyester	50 µm	Prelaq Nova		Hard Coat
1)Armatone®	Polyeten	50 µm		Pural
Multicoat		60 µm
Colorcoat HPS200	Plastisol	200 µm
1) A alternative to Plastisol that is friendly to the inviroment. Also available in metallic.

Steelqualities	Zinkweight/m²
DX51D	Z100 - Z350
DX52D	Z100 - Z350
DX53D	Z100 - Z350
S320GD	Z100 - Z350
S350GD	Z100 - Z350
DC01	.
In principal you can put lacquer on all qualities in Corus productprogram.